| Customization: | Available |
|---|---|
| Type: | Material Testing Machine |
| Load Way: | Electronic Load |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Influence Factors | Reference Conditions | Operating Conditions | Remarks |
| Ambient environment | 23ºC±1ºC | -10ºC~40ºC | |
| Ambient humidity | 40%~60% | <80% | |
| Signal waveform | Sine wave | Sine wave | β=0.05 |
| Signal frequency | 50HZ±1HZ | 45HZ~65HZ | |
| Working voltage | 9V±0.1V | 9V±1V | |
| Phase current range applicable | 1A±0.1A | 10mA~20.0A | |
| Phase voltage range applicable | 100V±10V | 30V~600V | |
| External electric field and magnetic field | Shall be avoided | ||
| Location of tested wire | The tested wire is located in approximate geometric center of the clamp jaw | ||
| Function | Directly test phase, A.C. current, A.C. voltage, A.C. leak current, and phase sequence; identify grouping, inductive, and capacitive circuit of transformer; and indirectly test power factor and power. |
| Power Supply | DC9V alkaline dry batteries (1.5V AA×6) |
| Power Consumption | Nearly 35mA at the maximum if backlight on, batteries work continuously for nearly 40 hours. |
| Nearly 5mA if backlight off, batteries work continuously for 300 hours. | |
| Display | LCD display, blue screen with backlight design, applicable to dark places. |
| LCD Size | 70mm×62mm |
| LCD Display Field | 64mm×54mm |
| Instrument Size | (L x W x H): 196mm×92mm×54mm |
| Jaw Size: | φ7.5mm×13mm |
| Sampling Rate | Nearly 3 times/second |
| Range | A.C Voltage: 0~20V/200V/600V |
| A.C Current: 0~200mA/2A/20A | |
| Phase: 0~360° | |
| Range of tested signal during phase measuring | When measuring phase U1-U2: 30V~600V |
| When measuring phase I1-I2: 10mA~20.00A | |
| When measuring U1-I2 or I1-U2: 10V~600V, 10mA~20.00A | |
| Data-hold | Press HOLD to hold data during test, and DH displays. |
| Auto power-off | The instrument shut off automatically in 15min after startup so that to reduce battery consumption. |
| Voltage test | When the battery voltage is less than 7.2v, the low voltage symbol appears, reminding to replace the battery. |
| Mass of instrument | The body is nearly 550g (battery included), the clamp is nearly 170g x2, and the test wire is nearly 250g. |
| Length of test wire | 1.5m |
| Line length of current clamp | 2m |
| Operating temperature and humidity | -10ºC~40ºC; 80%Rh and less |
| Storage temperature and humidity | -10ºC~60ºC; 70%Rh and less |
| Input impedance | Input impedance of tested voltages: 2MΩ |
| Input impedance of voltage when testing phases U1U2: 40kΩ | |
| Withstand voltage | Withstand voltage between upper cover of the instrument and bolt on battery cover place is 2000V/50Hz sine wave A.C. current for one minute. |
| Insulation | Insulation between wires and the shell of instrument and insulation between two voltage input ends ≥10MΩ. |
| Structure | Double insulation |
| Category | Range | Resolution | Basic Error |
| Voltage | 20V | 0.01V | ±(1.2%rdg+2dgt) |
| 200V | 0.1V | ||
| 500V | 1V | ||
| Current | 200mA | 0.1mA | ±(1.0%rdg+2dgt) |
| 2A | 1mA | ||
| 10A | 10mA | ||
| Phase | 0~360° | 1° | ±1° |
){kind=link}