Portable Primary Current Injection Set

• After-sales Service: Life Long Support
• Warranty: 1 Year
• Type: Primary Current Injection Test Set
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HMSLQ
• Accuracy Grade: 1
• Power Source: AC220V
• Transport Package: Wooden Box with Foam Inside
• Trademark: hmdq
• Origin: Hubei, China(Mainland)
• HS Code: 9030390000
• Production Capacity: 500sets/Month
• Package Size: 59.00cm * 46.00cm * 68.00cm
• Package Gross Weight: 68.000kg

Product Description

portable primary current injection set

1. Summary

portable primary current injection set is the necessary equipment in places of strong current. It is widely used in power plants, power distribution stations, electrical manufacturers, research institutes and other departments. The equipment has the characters of short-term or intermittent system, small size, light weight and easy maintenance.




2.Main parameter:

Input voltage: AC220V/380V ± 10% 50Hz /60hZ.
Output current: 0-20000A (according to customer demand).
Output voltage: 6V-24V(according to customer demand).
Duty cycle: 24 hours(according to customer demand)
Ambient temperature: -10 ºC to 50 ºC.
Current accuracy: ≤ 1.0% (F.S).
100 channels temperature detection.(according to customer demand)

3. Instructions

1. Connect the current amplifier with the tested product according to the testing requirements, and make sure that there's power supply. (For split type, connect the "input" on the panel with the power, the "output" with the "input" on DDK, and the "instrument" with the "instrument" on DDK.
2. Select the position of Current Switch according to the needed current.
3. Turn on the power, and the green light should be on (if not, turn the Voltage Switch counterclockwise to zero until the green light is on). Press the Startup Button, the green light should be off and the red light is on. Turn the Voltage Switch clockwise until the current rises to the needed level.
4. Turn the Voltage Switch counterclockwise to zero, press the Stop Button, the red light is off and the green light is on. The testing is over.