Portable 500A 1000A Primary Current Injection Tester

• Customization: Available
• After-sales Service: Life Long Support
• Warranty: 1 Year
• Model NO.: HMSLQ
• Accuracy Grade: 1
• Power Source: AC220V
• Transport Package: Wooden Box with Foam Inside
• Trademark: hmdq
• Origin: Hubei, China(Mainland)
• HS Code: 9030390000
• Production Capacity: 500sets/Month
• Package Size: 59.00cm * 46.00cm * 68.00cm
• Package Gross Weight: 68.000kg

Product Description

1. Introduction

Primary injection test set also could called primary current injector. it has three phase and single phase, and also we should consider whether it is AC or DC output.
this model is widely used in the circuit breaker, busbar, ct manufacturers. most manufacturer use such primary injection test set for temperature rising test.



2.Main parameter:

Input voltage: AC220V/380V ± 10% 50Hz /60hZ.
Output current: 0-20000A (according to customer demand).
Output voltage: 6V-24V(according to customer demand).
Duty cycle: 24 hours(according to customer demand)
Ambient temperature: -10 ºC to 50 ºC.
Current accuracy: ≤ 1.0% (F.S).
100 channels temperature detection.(according to customer demand)


3. Instructions

1. Connect the current amplifier with the tested product according to the testing requirements, and make sure that there's power supply. (For split type, connect the "input" on the panel with the power, the "output" with the "input" on DDK, and the "instrument" with the "instrument" on DDK.
2. Select the position of Current Switch according to the needed current.
3. Turn on the power, and the green light should be on (if not, turn the Voltage Switch counterclockwise to zero until the green light is on). Press the Startup Button, the green light should be off and the red light is on. Turn the Voltage Switch clockwise until the current rises to the needed level.
4. Turn the Voltage Switch counterclockwise to zero, press the Stop Button, the red light is off and the green light is on. The testing is over.