Portable Trolley Tdr Power Cable Fault Distance Locator Tester

Product Description

Portable Trolley TDR  Power Cable Fault  Distance Locator tester

I.Product introduction
Measure the power cable of different sections, different media of various materials, Coaxial cable, Street light cables and short circuit, open circuit short line fault of the low resistivity underground wire. Superior cable management system, automatically generate test reports.

II.Advanced features

1. 12" industrial-grade computer control, Touch screen LCD display.
2. XP operation system, Super cable management system and automatic generate testing report.
3. With test distance and speed functions.
4. 100MHZ sampling frequency, the minimum resolution is 0.5 m (100 m/us);
5. Automatic continuous sampling, will never miss any discharge waveform;
6. Measuring method: flashover sampling and Low voltage impulse method
7. Pulse margin: 100Vp-p , pulse width:0.1 or 2us
8. Impulse width: 0.1uS and 2uS
9. Measuring distance : Smax: 30km   Smin:15km
10. Accuracy:±1%
11. Power supply: dc power supply, can continuous work for 4 hours

III. Main parameter
1) The single chip operational platform, touch-screen operational method:
2)System functions:Fault distance measurement Fault locating,transmission speed test fault resistance Power cable route tracing buried depth detection etc;
3)Detecting method:Low voltage impulse Flash over method Audio frequency method Acoustic magnetic synchronous method Valley value method Peak method Electromagnetic induction etc;
4)Display control:Flashover instrument:12.1 inches industrial grade LCD
5)Detection range:testing distance:30km,detection depth:2-5m;
6)Measurement accuracy:Pre-testing tolerances:±10m(absolute value)or 1%(relative value),Precisely detecting tolerances:±0.2m(Locating route depth);
7)sampling frequencies: 80MHz 40MHz 20MHz 10MHz
8)sampling method:automatic continuous sampling, no any discharging wave form can be left out absolutely.
9)low voltage impulse:0.05/0.1/0.2/0.5/1/2/8uS,seven
10)Output power:Route power:100W. Impact power:0~400W
11)Impact high voltage:0~35kV
12)short circuit current:0~320mA
13)Burn through power:0~1225J
IV. Power cable fault testing program
By applying the HM501A flashover instrument to locate the cable fault following procedures are generally required:
(1)Analyze the cable fault characteristics and learn about the cable rated voltage and the insulation materials.
   (2)Using the HM 501A Power cable Flashover instrument's impulse method to detect the cable length, and also to calibrate the radio wave speed in the fault cable.
   (3)By selecting the suitable testing method, applying the HM 501A Power cable flashover instrument to pre-locate the cable fault.
   (4)to pin point the power cable fault precisely, include the underground cable route, depth and the fault point locating.
(5)Applying the tolerances analysis method to the cable fault testing results(measuring tolerances transferring speed tolerances judgments tolerances instrument tolerances)

V. Program of system