100kv 120kv Gas Type Partial Discharge Testing Equipment

• Customization: Available
• Warranty: 1 Year
• Type: Impact Testing Machine
• Load Way: Electronic Load
• Display: Digital
• Control: Manual Control
• Weight: Customized
• Power Source: AC220V
• Capacity(kVA): 5-300 or Customized
• Regulator Capacity(kVA): 5 -300 or Customzied
• Working Time: 5 Mins or Customized
• Output(Kv): 50-300 or Customzied
• PC Amount: Less Than 5 PC or Customzied
• Wave Distortion: <3
• Impedance Voltage: <8
• No-Load Current: <6
• Certificate: CE,SGS
• Standard: IEC
• Transport Package: Wooden Box with Foam Inside
• Specification: test transformer
• Trademark: HMDQ
• Origin: Hubei, China(Mainland)
• HS Code: 9030339000
• Production Capacity: 50sets/Month

Product Description

100KV Partial Discharge Testing Equipment Sf6 Gas Pd Free Testing Transformer hipot tester  Dielectric Strength  hv test set 

I. Summary
Transformer partial discharge detection device(sf6 high voltage test set) is a necessary test device for power equipment detection and preventive test.
Because of the sf6 high voltage test set excellent insulation and arc extinguishing performance and nonflammability, the six sulfur fluoride gas has been widely applied as a new insulating medium.
After years of efforts, our company has successfully developed a partial discharge detection device for transformers. Compared with the traditional oil immersion light test transformer, this series of the high voltage test set reduce the weight by 20% - 60% (depending on the voltage and capacity grade), and without oil pollution, the voltage level of the single test transformer can reach 300KV. Due to the adoption of the new production technology, the technical performance of the product has been greatly improved, especially for field work and frequent mobile working conditions.



II. Technical indicators and parameters
1.No-load current is 4 to 9%, and impedance voltage is 4 to 10%.
2.Specifications and running time of high voltage test set.
3.More specifications can be customzied 
 

Model	YDQ capacity KVA	Regulator capacity KVA	Working time min
ydq-2	1.5	1.5	≤5
ydq -3	3	3	≤5
ydq -5	5	5	≤5
ydq -10	10	10	≤5
ydq -20	20	20	≤5
ydq -30	30	30	≤5
ydq -50	50	50	≤5

Transformer's technical parameters
 

Input (V)	200	200	400	400	400	400	400
Output (KV)	50	100	150	200	250	300	400
PC	<=3	<=3	<=3	<=3	<=5	<=10	<=10
Impedance%	<=8	<=8	<=8	<=8	<=10	<=10	<=10
No-load current%	<=6	<=6	<=6	<=6	<=5	<=5	<=5
Distortion%	∠3	∠3	∠3	∠3	∠3	∠3	∠3

III. Main Parameter for 10kVA/100kV power frequency hipot tester partial dsicharge test equipment
1. gas testing transformer specifictaion
Model No.: HM-YDQW-10kVA/100kV
Phase :single phase
Frequency:50Hz                                       
Rated capacity:10kVA
Input voltage:0.2kV  
Input current:50A       
Output voltage:0~100kV
Output current: 0.1A
Waveform deviation factor:≤3%
Measurement winding voltage ratio:1000:1
pC amount: ≤5PC,at rated 60%voltage,≤3PC
2.Manual console specification
Model No.:HMTC-100
Phase:single phase                                            
Frequency:50Hz
Rated capacity:10kVA
Input voltage:0.2kV 
Input current:50A       
Output voltage:0~200V
Output current:50A
Waveform deviation factor:≤3%
Insulation level: low voltage input terminal to ground power frequency voltage withstand level 5kV/1min
Insulation level:<0.3%
Noise: ≤60dB
pC amount: ≤5PC,at rated 60%voltage,≤3PC

3.  Coupling capacitor specification
Mode:  HM-TRF-100-0.01
Rated frequency: 50Hz
Capacity: 500PF±10%
Rated voltage : 100kV                        
Divider ratio: 1000:1
Dielectric loss:<0.5%
Precision: 1.5
Partial discharge: ≤5PC,at rated 60%voltage,≤3PC
4.Isolation transformer technical parameterMode: HM-GLB-LNF-100
Rated capacity:10kVA                           
Input voltage:220V
Output voltage:220V
Output current:50A
Rated frequency: 50~60Hz
Number of line:2 line
Quality factor of filter reactor:>70
Partial discharge: ≤5PC,at rated 60%voltage,≤3PC




IV. Related Products.