Function and use:
IEC 61850 is the only international standard of intelligent substation automation system based on network communication platform, which makes it possible for information sharing and interoperability between different intelligent electrical equipment. As an optical digital relay protection tester which meets the requirements of IEC 61850 standard, it provides a complete test scheme for relay protection and automation devices based on this standard.
Main technical features:
1.Complete port: 16 to 100M-FX port, 12 FT3 and 2 FT3 send receive, protection simulation test of 12 MU.
2.Unique electrical monitoring function: 1 Port Road Network (1000M network) output function, can input and output data to monitor the test process. Connect the network entrance through notebook, can realize digital multimeter function.
3.All kinds of standard: provides IEC61850-9-1/9-2/9-2LE, GOOSE, IEC60044-7/8, FT3, FT3LE and other standard.
4.Collector output: it can provide multiple manufacturers of packet output.
5.Merging unit test mode: output sampling FT3/FT3LE format sampling value message, and reading the merging unit 9-2 or FT3 message, measuring the ratio of the merging unit, the angle difference.
6.Network analyzer function: grab IEC 61850 or FT3 data packet, display and record data waveform, and simulate the output of lost frames and garbled.
7.Small signal output function: 12 small signal analog output, to provide protection for small signal input test.
8.Optical digital signal test: analog packet loss, garbled, SMV data error and provide GOOSE storm test.
9.Visual output waveform: 24 output waveform in original and recorded, visual display of the machine or external device output waveform and digital recording, digital protection measurement can be solved and waveform display problems.
10.Complete parsing protection model file: complete parsing SCL (SCD, ICD, CID) files, to achieve automatic configuration of SV, GOOSE information, flexible and convenient interface with various types of protection.
11.A variety of timing modes: it can use second pulse, IRIG-B code or IEEE1588 timing.
12.Built in GPS module: GPS direct control, bilateral synchronization test, optical fiber longitudinal differential protection test.
13.Strong compatibility: easy to test and quick start.
14.Dual operation mode: built-in industrial computer, single machine operation, and even computer operation, two ways of function is exactly the same, a truly complete dual operation mode.
Main technical parameters:
1.Ethernet communication interface
-Model: 10/100Base-TX (10/100Mbit, twisted pair, automatic crossover)
-Number of ports: 2
-Interface type: RJ45
2.Optical fiber communication interface
-Model: 100Base-FX (100Mbit, optical fiber, full duplex)
-Number of ports: 16 pairs
-Interface type: ST
Fiber optic cable type: 62.5/125 mu m (multimode fiber)
Wavelength: 1300nm
FT3 interface
Number of ports: 14 (12 for sending, 2 for receiving)
Interface type: ST
Fiber optic cable type: 62.5/125 mu m (multimode fiber)
Wavelength: 1300nm
Small signal analog output
Output channel: 12 way
Output range: AC:0~10Vrms
Output accuracy: less than 0.05%
Switching input
Quantity: 10 paths
Characteristics: adaptive with potential or null contacts
On-off output
Quantity: 8 way
Capacity: AC250V/0.5A DC250V/0.2A
){kind=link}