Secondary Injection Test System for Relay

Product Description

Product Description

Secondary Injection Test System for relay


Product description
IEC 61850 is the only international standard for intelligent substation automation systems based on a network communication platform. This standard enables information sharing and interoperability between different intelligent electrical equipment. HMJBC-6000 optical digital relay protection tester that fully complies with the IEC 61850 standard, it provides a complete test solution for relay protection and automation devices based on this standard.


Main technical features:
Complete optical ports: 16 pairs of 100M-FX optical ports, 12 FT3 transmissions and 2 FT3 receptions, simulating 12 MUs for protection testing.
Unique electrical port monitoring function: It has 1 G network electrical port (1000M network) output function, which can monitor the input and output data during the test. Connect the G network electrical port through a notebook to realize the function of a digital multimeter.
Various standard messages: Various types of messages complying with IEC61850-9-1/9-2/9-2LE, GOOSE, IEC60044-7/8 FT3, FT3LE, etc. can be provided.
Collector output: can provide collector message output from multiple manufacturers.
Merging unit test mode: output the sampled value message of the collector FT3/FT3LE format, and read the merge unit 9-2 or FT3 message at the same time, and measure the ratio and angle difference of the merge unit.
Network analyzer function: grab IEC 61850 or FT3 data packets, display and record data waveforms, and simulate frame loss and garbled codes in the output.
Small signal output function: 12 channels of small signal analog output, providing protection device testing for small signal input.
Optical digital signal test: It can simulate packet loss, garbled code, SMV data error and provide GOOSE storm test.
Output waveform visualization: The original 24-channel output waveform recovery and recording, visually display the output waveform of the machine or external equipment and digitally record the waveform, which solves the problem that digital protection cannot directly measure and display the waveform.
Complete analysis of protection model files: Complete analysis of SCL (SCD, ICD, CID) files, automatic configuration of SV, GOOSE information, and flexible and convenient interface with various types of protection.
Multiple time synchronization modes: second pulse, IRIG-B code or IEEE1588 time synchronization can be used.
Built-in GPS module: GPS is directly controlled, and can be synchronized to test on both sides, and perform fiber longitudinal differential protection and other tests.
Strong compatibility: The test interface and operating habits of the same style as the traditional relay protection instrument are convenient for testers to get started quickly.
Dual operation mode: Built-in industrial computer, can be operated by a single machine, and can be operated by a computer. The functions of the two modes are completely consistent, a truly complete dual operation mode.

Product Parameters

The main technical parameters:
Ethernet communication interface

Model	10/100Base-TX (10/100Mbit, twisted pair, automatic crossover)
Number of ports	2
Interface type	RJ45
Optical fiber communication interface
Model number	100Base-FX (100Mbit, optical fiber, full duplex)
Number of ports	16 pairs
Interface type	ST
Optical cable model	62.5/125μm (multimode fiber)
Wavelength	1300nm
FT3 interface
Number of ports	14 (12 for sending, 2 for receiving)
Interface type	ST
Optical cable model	62.5/125μm (multimode fiber)
Wavelength	1300nm
Small signal analog output
Output channels	12 channels
Output range	AC: 0~10Vrms
Output accuracy	<0.05%
Switch input
Quantity	10 channels
Characteristics:	self-adaptive with potential or empty contact
Switch output
Quantity	8 channels
Capacity	AC250V/0.5A DC250V/0.2A